Analysis of Industrial Aluminum Profile How To Do Not Deformation?

From the field of application, industrial aluminum profiles refer to all aluminum profiles except for aluminum profiles used in building doors and Windows, curtain walls, indoor and outdoor decoration and building structures. In modern society, industrial aluminum profiles have become an indispensable part. But some partners will have a problem, that is, how to do industrial aluminum profiles without deformation? Let’s follow Ningbo Yuding Aluminum Co., Ltd. to talk about it!

If the profile is scrapped in the case of bending, it is very unworthy, it should not happen, and it can be avoided. So, how to reduce or avoid scrapping due to bending?

1, the extrusion aluminum profile straightening, can eliminate the metal stress generated in the extrusion process, control the size of the aluminum profile.

2, extrusion straightening is the aluminum profile caused by bending is very serious link, straightening workers must pay attention to the strength used in straightening, the force is too large may cause deformation of aluminum profile, closing, orange peel, etc., the force is too small will produce the profile is not straightened, resulting in bending.

3, extrusion framing this link is also very important, after sawing the length, the aluminum profile will be framed, the fashion framer should pay special attention to: see whether the material is aniseed or small material, is a tube material or a flat mold pulled out of the material. In general, aniseed and tube material lifting both ends of the frame is not easy to cause bending, but the small material and the material pulled out of the surface die, lifting both ends is easy to cause bending, then it should be moved from both ends to the middle to lift the frame. But some profiles even this is not enough, such as: louvers, Windows, caps, etc., you must put this kind of material on the aging profile and then lift it into the frame.

4, surface treatment shelf, billet aging, hardness has reached the standard, aluminum profile is not so easy to bend, but it is still necessary to pay attention to the shelf, lifting material at both ends, try to avoid strong fluctuations up and down, strong fluctuations will also cause a certain bending of the aging aluminum profile.