What Do Aluminum Profile Manufacturers Need To Pay Attention To When Producing?

Aluminum profile manufacturers in the production of aluminum profiles, there are a lot of places that need to be paid attention to, and they should be standardized when handling, so that it is more beautiful and durable in future use. Write down what details we need to pay attention to.

1, the problem to pay attention to in the spray room: before the formal spray, you can test spray several times, this time you can observe the size of the powder at both ends of the spray room and the degree of uniform powder distribution. At this time, the powder runs in a straight line within 10cm of the end of the spray claw, and the powder adsorbed on the surface of the profile is actually the powder of this atomization effect, and the powder with this atomization effect is not the standard for controlling the distance between the spray claw and the profile.

2, the production of fixture and the choice of feeding method: the fixture hanging at both ends should ensure that it can withstand considerable weight pressure; In the process of making and using the fixture used in the middle part, the size of the contact point of the fixture and the outer surface of the profile should be minimized, and the vertical hanging rod part should be filled in time, and the position of the profile in the hanging tool should also follow the corresponding principles.

3, the ordinary pre-treatment process before oxidation is simple, mainly for degreasing and chromium, and the raw material consumption is low. In order to improve production efficiency during the pre-treatment process, industrial aluminum profiles and reduce energy consumption during the drying process, large racks are used and as many profiles to be processed as possible are installed.

4, when the drying process is completed, there is still water residual, in order to avoid destroying the surface of the profile of the coating and the temperature is too high when the profile is easy to deformation, should not be put into the oven to bake, you can use cool drying or air gun dry way.

In short, when the aluminum profile manufacturer is producing, it is necessary to pay attention to the processing of these details, and the service life can be extended in the later period.